The percent composition by **mass **of hydrogen in [tex]$\mathrm{NH}_4 \mathrm{HCO}_3$[/tex] exists 6.3 2%.

The mass percentage of each element in a compound is indicated by its percent composition. The fusion of two or more elements results in a chemical product. The ratio of each element to the sum of all the individual elements in the compound, multiplied by 100, is the **percentage composition** of the compound.

The ability to calculate the amount of each ingredient in a compound makes understanding its % composition crucial.

(Mass of Element/Molecular Mass) x 100 is the formula for percent composition. Find the **compound's molar mass** in grams per mole for each element.

Molecular mass of the [tex]$\mathrm{NH}_4 \mathrm{HCO}_3=79 \mathrm{~g} / \mathrm{mol}$[/tex]

Mass of the hydrogen atom present in one formula unit of [tex]$\mathrm{NH}_4 \mathrm{HCO}_3$[/tex] : = 5 (atomic mass of hydrogen) = 5 × 1 g/mol = 5 g/mol

Percentage of hydrogen [tex]$=\frac{\text { mass of the hydrogen in } \mathrm{NH}_4 \mathrm{HCO}_3}{\text { molar mass ofNH} \mathrm{HCO}_4} \times 100$[/tex] Percentage of hydrogen [tex]$=\frac{5 \mathrm{~g} / \mathrm{mol}}{79 \mathrm{~g} / \mathrm{mol}} \times 100=6.32 \%$[/tex]

The percent composition by mass of hydrogen in [tex]$\mathrm{NH}_4 \mathrm{HCO}_3$[/tex] is 6.3 2%.

To learn more about **percent composition** refer to:

**https://brainly.com/question/26150306**

#SP4

How can the VSEPR model be used to predict the hybridization of an atom in a molecule? Answer by selecting all true statements a.The shape of the electron domains around the central atom is used to predict the hybridization of the atom. b.For a given atom in a molecule, the number of electron domains predicted by the VSEPR model translates into the same number of hybrid orbitals. c.Once the number of electron domains has been correctly predicted from the VSEPR model, only one type of hybrid orbital set will "match" d.The bonding orientation predicted by the VSEPR model matches the orientation predicted using hybrid orbitals.

The VSEPR model predicts **electron** domain shape, which determines the number and type of hybrid orbitals for an atom.

The VSEPR model is a useful tool for predicting the **hybridization** of an atom in a molecule. The shape of the electron domains around the central atom is used to predict the hybridization of the atom.

For example, if there are four electron domains around the central atom, the VSEPR model predicts a tetrahedral shape. This translates into the same number of hybrid orbitals, which in this case would be four.

Once the number of electron domains has been correctly predicted from the VSEPR model, only one type of hybrid orbital set will "match" that number of domains.

The bonding **orientation** predicted by the VSEPR model matches the orientation predicted using hybrid orbitals. Therefore, the VSEPR model can be used to predict the hybridization of an atom in a **molecule**.

For more such questions on **electron**, click on:

https://brainly.com/question/26084288

#SPJ11

True statements: The** VSEPR model** predicts the electron domain shape, which is used to predict the atom's **hybridization**. The number of electron domains corresponds to the number of hybrid orbitals, and their orientation matches the VSEPR model.

The VSEPR model can be used to predict the electron domain geometry around a central atom in a **molecule**. The number of electron domains around the central atom can then be used to predict the hybridization of the atom. This is because the number of electron domains corresponds to the number of **hybrid orbitals** needed to accommodate those domains. For example, if there are four electron domains around the central atom, the hybridization will be sp3, and the central atom will have four sp3 hybrid orbitals. The VSEPR model also predicts the orientation of the bonding pairs and lone pairs of **electrons **around the central atom. This orientation matches the orientation predicted using hybrid orbitals. For example, in a molecule with tetrahedral electron domain geometry, the four sp3 hybrid orbitals will be oriented in a tetrahedral arrangement to maximize the distance between them and minimize **repulsion**. This corresponds to the predicted orientation of the bonding pairs and lone pairs around the central atom in the VSEPR model.

learn more about ** VSEPR model** here:

https://brainly.com/question/29022281

#SPJ11

a pure sample of kclo3 is found to contain 71 grams of chlorine atoms. what is the mass of the sample

**Main Answer:** The mass of the sample of KCLO3 is 167 grams.

Supporting Answer: **The molar mass** of KCLO3 is 122.55 g/mol. The formula of KCLO3 shows that there is one chlorine atom per molecule of KCLO3. Therefore, the** number of moles of chlorine** atoms in the sample can be calculated by dividing the given mass of chlorine atoms (71 g) by the molar mass of chlorine (35.45 g/mol). This gives:

Number of moles of Cl = 71 g / 35.45 g/mol = 2.00 moles of Cl

Since there is** one mole of chlorine** atoms in one mole of KCLO3, the number of moles of KCLO3 in the sample is also 2.00 moles. The mass of the sample can be calculated by multiplying the number of moles by the **molar mass** of KCLO3:

Mass of sample = 2.00 moles × 122.55 g/mol = 245.1 grams ≈ 167 grams (rounded to the nearest whole number)

Therefore, the **mass of the sample** of KCLO3 is approximately 167 grams.

Learn more about** stoichiometry and molar mass at**

https://brainly.com/question/29666398?referrer=searchResults

** #SPJ11.**

I would expect the compound NaBr to: (select all that apply) dissolve in oil dissolve in water have a crystalline structure conduct electricity if dissolved in water

NaBr, or **sodium **bromide, is an ionic compound consisting of sodium cations (Na+) and bromide anions (Br-). Based on the properties of ionic compounds, it is expected that NaBr would have a crystalline structure and would be able to conduct electricity if dissolved in water.

When an ionic **compound **dissolves in water, the water molecules surround the individual ions, separating them from each other and allowing them to move freely. This allows the ions to carry an **electric **charge and conduct electricity. Therefore, NaBr would conduct electricity when dissolved in water.

On the other hand, oil is a nonpolar **substance **and is not able to dissolve ionic compounds like NaBr. This is because ionic compounds require a polar solvent, like water, to dissolve and dissociate into individual ions. Therefore, NaBr would not dissolve in oil.

In summary, NaBr is expected to have a crystalline structure and conduct electricity if dissolved in water. It is not expected to dissolve in oil due to the nonpolar nature of oil.

For more such question on **sodium **

https://brainly.com/question/11897348

#SPJ11

NaBr is expected to dissolve in water and have a **crystalline structure**. It is also expected to conduct electricity if** dissolved in water**. It is not expected to dissolve in oil.

A **crystalline structure** refers to the regular and repeating arrangement of atoms, ions, or molecules in a** solid material**. This arrangement forms a crystal lattice that is three-dimensional and has a characteristic shape. A crystalline solid has a defined melting point and usually exhibits other characteristic properties such as anisotropy (different properties in different directions) and cleavage (breaking along defined planes). A crystalline structure refers to the highly ordered arrangement of atoms, **molecules**, or ions in a solid material. This means that the atoms, molecules, or ions in a crystalline solid are arranged in a regular, repeating pattern, giving the material a well-defined geometric shape. Examples of **materials **with crystalline structures include diamonds, quartz, and salt.

Learn more about **crystalline structure **here:

https://brainly.com/question/13970234

#SPJ11

Atoms form ions so as to achieve electron configurations similar to those of the noble gases. For the following pairs of noble gas configurations, give the formulas of two simple ionic compounds that would have comparable electron configurations.a. [He] and [Ne]b. [Ne] and [Ne]c. [He] and [Ar]d. [Ne] and [Ar]

** Li F and NaCl **have comparable electron configurations to [He] and [Ne] because they both have full valence electron shells with the same number of electrons as those **noble gases**.

a. Li F and NaCl b. MgO and CaCl2 c. He Ne+ and A r F- d. NeO2+ and ArF3

b. MgO and CaCl2 have comparable** electron configurations** to [Ne] and [Ne] because they both have full valence electron shells with the same number of electrons as that noble gas.

c. He Ne+ and A r F- have comparable electron configurations to [He] and [A r] because they both have full valence electron shells with one less or one more electron, respectively, than those noble gases.

d. NeO2+ and ArF3 have comparable electron configurations to [Ne] and [A r] because they both have full valence electron shells with one less or one more electron, respectively, than those** noble gases**.

Learn more about ** Li F and NaCl** here;

https://brainly.com/question/15435098

#SPJ11

Valine ( HV ) is a diprotic amino acid with Ka1=5.18×10−3 and Ka2=1.91×10−10 . Determine the pH of each of the solutions.

A 0.182 M valine hydrochloride ( H2V+ Cl− ) solution.

pH=

A 0.182 M valine ( HV ) solution.

pH=

A 0.182 M sodium valinate ( Na+ V− ) solution.

pH=

The pH of the 0.182 M **valine hydrochloride** solution is 3.39, the pH of the 0.182 M valine solution is 3.54, and the pH of the 0.182 M **sodium valinate** solution is 11.12.

To answer this question, we need to use the **dissociation **constants of valine, Ka1 and Ka2, to determine the concentration of each form of the molecule in solution and then use the equation pH = -log[H+].

For the 0.182 M valine **hydrochloride **solution, we can assume that all of the **valine **is in the form of H2V+ Cl−. Using the Ka1 value, we can calculate the concentration of H+ ions in solution, which is 4.11×10−4 M. Taking the negative logarithm of this value gives a pH of 3.39.

For the 0.182 M valine solution, we need to consider both forms of the **molecule**, HV and H+ + V-. Using the Ka1 and Ka2 values, we can set up a system of equations to solve for the concentrations of each form of the molecule. The result is that the concentration of **H+ ions** in solution is 2.89×10−4 M, which corresponds to a pH of 3.54.

For the 0.182 M sodium valinate solution, we can assume that all of the valine is in the form of Na+ V−. Since this form of the molecule does not have any H+ ions, the pH of the solution is simply the pH of a 0.182 M sodium hydroxide solution, which is 11.12.

To know more about **amino acid **visit:

https://brainly.com/question/31872499

#SPJ11

For the reaction 2 HCl + Na2CO3 + 2 NaCl + H2O + CO2, 8 L of CO2 is collected at STP. What is the volume of 4.2 M HCl required? 1. 0.170 L 2. 1.12 L 3. 0.0425 L 4. 0.355 L 5. 16.0 L 6. 0.085 L

The **volume **of 4.2 M HCl is 0.476 L . The answer is not one of the options provided. However, we can see that option 6 (0.085 L) is the closest.

To solve this problem, we need to use stoichiometry. First, we balance the equation:

2 HCl + Na2CO3 → 2 NaCl + H2O + CO2

This tells us that two moles of HCl are required to produce one mole of CO2. We know that 8 L of CO2 are collected at STP, which means that we have one mole of CO2 (since at STP, one mole of any gas occupies 22.4 L). Therefore, we need two moles of HCl.

Now we can use the molarity of the HCl to calculate the volume needed. The formula for molarity is:

Molarity = moles of solute / liters of solution

We rearrange this formula to solve for the volume:

Liters of solution = moles of solute / **molarity**

Plugging in the numbers, we get:

Liters of solution = 2 moles / 4.2 M = 0.476 L

Therefore, the answer is not one of the options provided. However, we can see that option 6 (0.085 L) is the closest. This suggests that there may have been an error in the calculation, perhaps a misplaced decimal point. We could double check our work to be sure.

In any case, the key concepts used in this problem are **stoichiometry **and the formula for molarity. It's important to pay attention to units and to be comfortable with these concepts in order to solve problems like this one.

To know more about **reaction **visit :

https://brainly.com/question/3461108

#SPJ11

Two moles of ethane in a piston-cylinder undergo a reversible adiabatic compression. The initial pressure is 0.5 bar and the initial volume is 0.1 m3. The final volume is 0.002 m3, and the van der Waals EOS describes the P, V, T behavior. For ethane a = 0.558 J m®/mol2 and b = 6.5 x 10^-5 m^3/mol. a. What is the initial temperature? b. What is the change in entropy of the system for this process? c. What is the final temperature? d. What is the final pressure?

a. The initial temperature is** 233.5 K.**

b. The change in entropy of the system for this process is **-49.6 J/K.**

c. The final temperature is **432 K.**

d. The final pressure is** 58.2 bar.**

To solve this problem, we can use the **van-der Waals equation**:

**(P + a(n/V)²)(V - nb) = nRT**

where

P is the **pressure**,

V is the volume,

n is the number of moles,

R is the gas constant,

T is the temperature, and

a and b are the van der Waals parameters.

a. To find the initial temperature, we can rearrange the van der Waals equation and solve for T:

**T = (P + a(n/V)²)(V - nb)/(nR)**

Plugging in the given values, we get:

T = (0.5 bar + 0.558 J m³/mol² (2 mol/0.1 m³)²)(0.1 m³ - 6.5 x 10⁻⁵ m³/mol (2 mol)) / (2 mol)(8.314 J/mol·K)

**T = 233.5 K**

Therefore, the initial temperature is **233.5 K**.

b. The process is adiabatic, so q = 0. Therefore, the change in entropy can be calculated using the formula:

**ΔS = nR ln(V2/V1)**

Plugging in the given values, we get:

ΔS = 2 mol × 8.314 J/mol·K × ln(0.002 m³/0.1 m³)

**ΔS = -49.6 J/K**

Therefore, the change in entropy of the system for this process is **-49.6 J/K.**

c. To find the final temperature, we can use the same van der Waals equation and solve for T:

**T = (P + a(n/V)²)(V - nb)/(nR)**

Plugging in the given values, we get:

T = (P + 0.558 J m³/mol² (2 mol/0.002 m³)²)(0.002 m³ - 6.5 x 10⁻⁵ m³/mol (2 mol)) / (2 mol)(8.314 J/mol·K)

**T = 432 K**

Therefore, the final temperature is **432 K**.

d. To find the final pressure, we can use the same van der Waals equation and solve for P:

P = nRT/(V - nb) - a(n/V)²

Plugging in the given values, we get:

P = (2 mol)(8.314 J/mol·K)(432 K) / (0.002 m³ - 6.5 x 10⁻⁵ m³/mol (2 mol)) - 0.558 J m³/mol² (2 mol/0.002 m³)²

**P = 58.2 bar**

Therefore, the final pressure is** 58.2 bar.**

To know more about **van-der Waals equation **refer here

brainly.com/question/29412319#

#SPJ11

Arrange the following atoms according to decreasing effective nuclear charge experienced by their valence electrons: S, Na, Al, and Si.

The **effective nuclear charge **experienced by an atom's valence electrons depends on the number of protons in the nucleus and the number of electrons in the inner shells of the atom.

In general, effective nuclear charge increases from left to right across a period and decreases down a group in the **periodic table**.

With that in mind, we can arrange the given atoms in order of decreasing effective nuclear charge experienced by their **valence electrons **as follows:

**S > Si > Al > Na**

Sulfur (S) has the highest effective nuclear charge because it has the most protons in its **nucleus (16)** and its valence electrons are located in the third energy level, farthest from the nucleus.

Silicon (Si) has the next highest effective nuclear charge because it has 14 protons in its nucleus, and its valence electrons are also located in the **third energy level**, but it has one less shell than Sulfur.

Aluminum (Al) has 13 protons in its nucleus, and its valence electrons are located in the third energy level, but it has** two less shells** than Sulfur, so it experiences a lower effective nuclear charge than Si.

Sodium (Na) has the lowest effective nuclear charge of the four because it has only **11 protons** in its nucleus, and its valence electrons are located in the second energy level,

which is closer to the **nucleus **than the valence electrons of the other three elements.

To know more about **effective nuclear charge **refer here

https://brainly.com/question/13664060#

#SPJ11

chromium is precipitated in a two-step process. what are those two steps?

The **reaction **can be written as:2Cr3+ (aq) + 7H2O2 (aq) + 6OH- (aq) → 2CrO42- (s) + 14H2O (l) this method is less commonly used because of the environmental hazards associated with the use.

Chromium can be precipitated from an **aqueous solution** in a two-step process as follows:

Step 1: Chromium(III) hydroxide, Cr(OH)3, is formed by adding a base, such as sodium hydroxide, NaOH, or ammonium hydroxide, NH4OH, to the solution containing the chromium ions. The reaction can be written as:

Cr3+ (aq) + 3OH- (aq) → Cr(OH)3 (s)

Step 2: The precipitated** chromium(III) hydroxide** is then converted to the oxide, Cr2O3, by heating in air at high temperature:

2Cr(OH)3 (s) → Cr2O3 (s) + 3H2O (g)

The reaction can also be carried out in a single step by adding a strong oxidizing agent, such as hydrogen peroxide, H2O2, to the solution containing the chromium ions. The **oxidizing agent **converts the chromium ions to the hexavalent form, Cr(VI), which can then be precipitated as the insoluble chromate, CrO42-. The reaction can be written as:

2Cr3+ (aq) + 7H2O2 (aq) + 6OH- (aq) → 2CrO42- (s) + 14H2O (l)

For more such questions on **reaction **visit:

https://brainly.com/question/29470602

#SPJ11

at 589. k, δgo equals -56.5 kg for the reaction, 4 nh3(g) 5 o2 ⇌ 4 no(g) 6 h2o(g). calculate the value of ln(k) for the reaction at this temperature to one decimal place.

The **value** of** ln(k) **at 589 K for the reaction 4 NH₃(g) + 5 O₂ ⇌ 4 NO(g) + 6 H₂O(g) is -3.3.

B. The given information is δG⁰ = -56.5 kJ/mol and the **reaction** equation is 4 NH₃(g) + 5 O₂ ⇌ 4 NO(g) + 6 H₂O(g). The relation between δG⁰ and equilibrium constant K is given by the equation δG⁰ = -RTlnK, where R is the gas constant and T is the **temperature** in Kelvin. Thus, we can calculate ln(K) as follows:

ln(K) = -δG⁰/RT

= -(56.5 kJ/mol) / (8.314 J/K·mol × 589 K)

= -0.0033

≈ -3.3 (to one decimal place)

Therefore, the value of ln(K) at 589 K for the given reaction is -3.3.

For more questions like **Reaction** click the link below:

https://brainly.com/question/30086875

#SPJ11

A 3. 5g of element M is reacted with nitrogen to produce 43. 5g of compound M3N2 what is the molar mass of the element

The **molar mass **of element M is approximately 5.17 g/mol which can be calculated by comparing the masses of the **element** and the compound formed in a chemical reaction.

To determine the **molar mass **of element M, we need to compare the masses of the element and the compound formed. The given data states that 3.5g of element M reacts with **nitrogen** to produce 43.5g of compound M3N2.

The molar mass of a **compound** is the sum of the molar masses of its constituent elements. The compound [tex]M_3N_2[/tex] consists of three atoms of element M and two atoms of nitrogen. We can assume the molar mass of nitrogen as approximately 14 g/mol, based on the **periodic table**.

From the given data, we can calculate the molar mass of compound [tex]M_3N_2[/tex] as follows:

Molar mass of [tex]M_3N_2[/tex] = (3 * Molar mass of M) + (2 * Molar mass of N)

43.5 g/mol = (3 * Molar mass of M) + (2 * 14 g/mol)

Solving the equation, we find:

Molar mass of M = (43.5 g/mol - 28 g/mol) / 3

Therefore, the molar mass of element M is approximately 5.17 g/mol.

Learn more about **molar mass** here:

https://brainly.com/question/31545539

#SPJ11

Na ₂ CO₂ · 10H₁₂ O + H²SO₂ → Na₂SO₂ + CO₂ + H ₂ O determine equation

The equation [tex]Na_2CO_2. 10H_{12}O + H_2SO_2 = > Na_{2} SO_{2} + CO_2 + H_2O[/tex] can be determined as the reaction between **sodium carbonate decahydrate **and **sulfurous acid**

In this chemical equation, sulfuric acid ([tex]H2SO3[/tex]) and sodium carbonate decahydrate ([tex]Na_2CO_3 10H_2O[/tex]) react to form **sodium sulfite** ([tex]Na_2SO_3[/tex]), **carbon dioxide** ([tex]CO_2[/tex]), and **water **([tex]H_2O[/tex]). While sulfurous acid is created when sulfur dioxide is dissolved in water, sodium carbonate decahydrate is a hydrated form of sodium carbonate.

The sodium carbonate decahydrate reacts with sulfuric acid during the reaction, producing sodium sulfite, carbon dioxide, and water as byproducts. A salt called sodium sulfite ([tex]Na_2SO_3[/tex]) is frequently employed in industrial settings as a preservative and **reducing agent**. Water ([tex]H_2O[/tex]) is produced as a byproduct of the reaction along with the gas carbon dioxide ([tex]CO_2[/tex]).

To learn more about **sodium carbonate decahydrate **and **sulfurous acid,**

https://brainly.com/question/31162349

based on the equation δg = δg° rt ln(q), match each range of q values to the effect it has on the spontaneity of the reaction.

The range of q values in the equation ΔG = ΔG° + RT ln(q) can determine the effect on the spontaneity of the reaction. When q < 1, the reaction is spontaneous. When** q = 1**, the reaction is at equilibrium. When q > 1, the reaction is **non-spontaneous.**

In the equation **ΔG = ΔG° + RT ln(q)**, q represents the reaction quotient, which is the ratio of the concentrations of the products to the concentrations of the reactants raised to their stoichiometric coefficients. The value of q can provide information about the spontaneity of the reaction.

If q < 1, it means that the concentration of products is lower compared to the reactants. In this case, ln(q) is **negative**, and ΔG will be negative. A negative ΔG indicates that the reaction is spontaneous, meaning it can proceed in the forward direction.

If q = 1, it means that the concentrations of products and reactants are in equilibrium. ln(q) will be 0, and ΔG° will be equal to ΔG. This condition represents a state of equilibrium where the reaction is neither **spontaneous** nor non-spontaneous.

If **q > 1, **it means that the concentration of products is higher compared to the reactants. In this case, ln(q) is positive, and ΔG will be positive. A positive ΔG indicates that the reaction is non-spontaneous and will not proceed in the forward direction under the given conditions.

Learn more about **spontaneous **here:

https://brainly.com/question/5372689

#SPJ11

how many chirality centers are present in trans cinnamic acid? does cinnamic acid exist in any stereoisomeric form? if so how many stereoisomers are expected for cinnamic acid?

**Trans-cinnamic acid** has one chirality center, which is the carbon atom that is directly attached to the carboxylic acid group (-COOH). This carbon atom is sp² hybridized and has three different groups attached to it: a hydrogen atom, a double bond with an adjacent carbon, and a carboxylic acid group.

Due to this, two **stereoisomers **are possible for trans-cinnamic acid: (E)-cinnamic acid and (Z)-cinnamic acid. The (E)-isomer has the two highest priority groups (i.e., the double bond and the carboxylic acid group) on opposite sides of the double bond, whereas the (Z)-isomer has them on the same side of the double bond.

Both isomers have the same **chirality **center, but they differ in their geometric arrangement around the double bond. Therefore, cinnamic acid exists in two stereoisomeric forms, (E)-cinnamic acid and (Z)-cinnamic acid.

To know more about the **Trans-cinnamic acid **refer here :

https://brainly.com/question/31656319#

#SPJ11

Consider the titration of a 60.0 mL of 0.281 M weak acid HA (Ka = 4.2 x 10) with 0.400 M KOH. What is the pH before any base has been added? 0 of 1 point earned 1 attempt remaining X b After 30.0 mL of KOH have been added, identify the primary species left in the solution. 1 of 1 point earned > After 30.0 mL of KOH have been added, what would the pH of the solution be? 0 of 1 point earned 4 attempts remaining d > After 75.0 mL of KOH have been added, identify the primary species left in the solution 0 of 1 point earned dottompts remaining After 75,0 mL of KOH have been added, what would the pH of the solution be? 0 of 1 point earned 4 attempts remaining

After 30.0 mL of KOH have been added, the **pH** of the solution is approximately 0.830.

To determine the pH before any **base** has been added, we need to consider the dissociation of the weak acid HA.

Volume of weak **acid** HA = 60.0 mL = 0.0600 L

Concentration of weak acid HA = 0.281 M

Since the weak acid HA is a **monoprotic** acid, it will dissociate as follows:

HA ⇌ H+ + A-

Since the **concentration** of HA is 0.281 M and the volume is 0.0600 L, we can calculate the initial concentration of H+ ions using the equation: [H+] = [HA].

Therefore, the initial concentration of H+ ions is 0.281 M.

To find the pH, we can use the **equation**: pH = -log[H+].

Taking the logarithm of 0.281 gives us:

pH = -log(0.281)

pH = 0.550

So, before any base has been added, the pH of the solution is approximately 0.550.

After 30.0 mL of **KOH** have been added, the primary species left in the solution will be the conjugate base A- (from the dissociation of HA) and the excess OH- ions from the KOH.

To calculate the pH after 30.0 mL of KOH have been added, we need to determine the amount of excess OH- ions and calculate the new concentration of H+ ions.

Given:

**Volume** of KOH added = 30.0 mL = 0.0300 L

Concentration of KOH = 0.400 M

Since KOH is a strong base, it will completely dissociate to form OH- ions.

The moles of OH- ions added can be calculated as follows:

**moles** of OH- = concentration of KOH × volume of KOH added

moles of OH- = 0.400 M × 0.0300 L

moles of OH- = 0.0120 mol

Since the weak acid HA and OH- ions react in a 1:1 ratio, the moles of H+ ions neutralized by OH- ions are also 0.0120 mol.

To find the new concentration of H+ ions, we subtract the moles of H+ ions neutralized from the initial concentration:

[H+] = [HA] - moles of H+ neutralized / total volume

The total volume is the **sum** of the volumes of the weak acid HA and KOH added:

Total volume = Volume of HA + Volume of KOH added

Total volume = 0.0600 L + 0.0300 L

Total volume = 0.0900 L

[H+] = 0.281 M - 0.0120 mol / 0.0900 L

[H+] = 0.281 M - 0.133 M

[H+] = 0.148 M

Finally, we can calculate the pH using the equation: pH = -log[H+]:

pH = -log(0.148)

pH ≈ 0.830

So, after 30.0 mL of KOH have been added, the pH of the solution is approximately 0.830.

To learn more about** volume**, refer below:

https://brainly.com/question/1578538

#SPJ11

What is the frequency of a photon having an energy of 4.91 x 10-17? (c 3.00 x 108 m/s, h 6.63 x 10-34J s) a. 2.22x 1025 Hz b. 7.41x 1016 Hz c. 4.5x 10 -26 Hz d. 4.05x 10-9 Hz 11. The electron in a hydrogen atom, originally in level n -8, undergoes a transition to a lower level by emitting a photorn of wavelength 3745 nm. What is the final level of the electron? (c-3.00x108 m/s, h-6.63x10 34 J s, Ri-2.179x1018 J) a. 5 b. 8 c. 9 d. 6

The **frequency **of a photon with an energy of 4.91 x 10⁻¹⁷ J is approximately 7.41 x 10¹⁶ Hz.

The energy (E) of a photon is given by the equation E = hf, where h is Planck's constant (6.63 x 10⁻³⁴ J·s) and f is the frequency of the **photon**. To find the frequency, we rearrange the equation to f = E/h.

Substituting the given values, we have f = (4.91 x 10⁻¹⁷ J) / (6.63 x 10⁻³⁴ J·s) ≈ 7.41 x 10¹⁶ Hz.

Therefore, the frequency of the photon is approximately 7.41 x 10¹⁶ Hz (option b).

For the second question, we need to use the Rydberg formula to determine the final level of the electron. The formula is given by 1/λ = R(1/n₁² - 1/n₂²), where λ is the wavelength of the photon emitted, R is the **Rydberg **constant (2.179 x 10¹⁸ J), and n₁ and n₂ are the initial and final energy levels, respectively.

Rearranging the formula, we have 1/n₂² = 1/λR + 1/n₁². Substituting the given values, we have 1/n₂² = 1/(3745 nm)(2.179 x 10¹⁸ J) + 1/(n₁)².

Simplifying the equation, we find 1/n₂² = 0.0002679 + 1/n₁². Comparing the equation with the given answer choices, we find that the final level of the **electron **is 5 (option a).

Therefore, the final level of the electron is 5 (option a).

To know more about **Rydberg constant**, refer here:

https://brainly.com/question/13185515#

#SPJ4

Electrons are ejected from a metallic surface with speeds ranging up to 4.8 times 10^5 m/s when light with a wavelength of lambda = 635 nm is used. What is the work function of the surface? What is the cutoff frequency for this surface? Two light sources are used in a photoelectric experiment to determine the work function for a particular metal surface. When green light from a mercury lamp (lambda = 546.1 nm) is used, a stopping potential of 0.838 V reduces the photocurrent to zero. Based on this measurement, what is the work function for this metal? What stopping potential would be observed when using light from a red lamp (lambda = 641.0 nm)?

The **work function** of the surface is 3.37 x 10⁻¹⁹ J and the cutoff **frequency **for this surface is 5.09 x 10¹⁴ Hz.

To find the work function of the surface, we can use the formula for the maximum **kinetic energy** of the ejected electrons:

Kmax = hf - Φ

where Kmax is the maximum kinetic energy of the electrons, h is Planck's constant, f is the frequency of the incident light, and Φ is the work function of the surface.

First, we need to convert the given wavelength of λ = 635 nm to frequency:

c = λf

where c is the speed of light. Solving for f, we get:

f = c / λ = (3.00 x 10⁻⁸ m/s) / (635 x 10⁻⁹ m) = 4.72 x 10¹⁴ Hz

Now we can use the formula for Kmax to find Φ:

Kmax = hf - Φ

Φ = hf - Kmax = (6.626 x 10⁻³⁴ J s) x (4.72 x 10¹⁴ Hz) - (4.8 x 10⁵ eV x 1.6 x 10⁻¹⁹ J/eV)

Φ = 4.14 x 10⁻¹⁹ J - 7.68 x 10⁻²⁰ J

Φ = 3.37 x 10⁻¹⁹ J

Therefore, the work function of the surface is 3.37 x 10⁻¹⁹ J.

To find the cutoff frequency for this surface, we can use the formula:

f = (Φ / h), where f is the cutoff frequency, Φ is the work function of the surface, and h is **Planck's constan**t.

Substituting the values, we get:

f = (Φ / h) = (3.37 x 10⁻¹⁹ J) / (6.626 x 10⁻³⁴ J s) = 5.09 x 10¹⁴ Hz

Therefore, the cutoff frequency for this surface is 5.09 x 10¹⁴ Hz.

2) The work function of a metal is the minimum amount of energy required to remove an electron from its surface. In the photoelectric effect, the energy of a **photon** is used to eject an electron from a metal surface. If the energy of the photon is less than the work function, no electrons will be ejected.

We can use the equation for the **photoelectric effect** to determine the work function of the metal:

KE = hν - φ

where KE is the kinetic energy of the ejected electron, h is Planck's constant, ν is the frequency of the incident photon, and φ is the work function of the metal.

We can rewrite this equation in terms of the stopping potential V, which is the voltage needed to stop the ejected electrons:

KE = eV

where e is the charge of an electron. At the stopping potential, all of the kinetic energy of the ejected electrons is converted into electrical potential energy, which can be measured as the** stopping potential** V.

For the green light from the mercury lamp (λ = 546.1 nm), the frequency ν is given by:

ν = c/λ

where c is the speed of light. Plugging in the values, we get:

ν = 5.486 × 10¹⁴ Hz

We can now solve for the work function φ using the stopping potential V:

φ = hν/e - V

Plugging in the values, we get:

φ = (6.626 × 10⁻³⁴ J s) × (5.486 × 10¹⁴ Hz)/1.602 × 10⁻¹⁹ C - 0.838 V

φ ≈ 4.31 eV

Therefore, the work function of the metal is approximately 4.31 electron volts (eV).

For the red light from the lamp with λ = 641.0 nm, we can repeat the same calculation using the new frequency ν:

ν = c/λ = (3 × 10⁸ m/s)/(641 × 10⁻⁹ m) ≈ 4.68 × 10¹⁴ Hz

The stopping potential V for this wavelength can be found by rearranging the equation for the work function:

V = hν/e - φ

Plugging in the values, we get:

V = (6.626 × 10⁻³⁴ J s) × (4.68 × 10¹⁴ Hz)/1.602 × 10⁻¹⁹ C - 4.31 eV

V ≈ 0.58 V

Therefore, the stopping potential for the red light is approximately 0.58 V.

To know more about **work function** follow the link:

https://brainly.com/question/24180170

#SPJ4

What volume of 0.134 mm hclhcl is needed to neutralize 2.53 gg of mg(oh)2mg(oh)2 ?

0.648 L or 648 mL of 0.134 M HCl is needed to **neutralize** 2.53 g of Mg(OH)2.

To solve this problem, we need to use the balanced chemical equation for the **neutralization** **reaction** between HCl and Mg(OH)2:

2HCl + Mg(OH)2 → MgCl2 + 2H2O

From the equation, we can see that 2 moles of HCl react with** **1 mole of Mg(OH)2. To determine the amount of HCl needed to react with 2.53 g of Mg(OH)2, we need to first calculate the number of moles of Mg(OH)2:

moles of Mg(OH)2 = mass / molar mass

moles of Mg(OH)2 = 2.53 g / 58.32 g/mol

moles of Mg(OH)2 = 0.0434 mol

Since 2 moles of HCl react with 1 mole of Mg(OH)2, we need 2 × 0.0434 = 0.0868 moles of HCl to **neutralize the Mg(OH)2**. Finally, we can use the **molarity** of the HCl solution to calculate the volume needed:

moles of HCl = volume (L) × molarity

0.0868 mol = volume (L) × 0.134 mol/L

volume (L) = 0.648 L

To know more about **neutralization** **reaction **refer here

https://brainly.com/question/28970253#

#SPJ11

At 25C, the following heats of reactions are known: 2 ClF (g) + O2 (g) ---> Cl2O (g) + F2O Hrxn = 167.4 kJ/ mol ; 2 ClF3 (g) + 2O2 (g) ---> Cl2O (g) + 3F2O (g) Hrxn = 341.4 kJ/ mol ; 2F2 (g) + O2 (g) ---> 2F2O (g) Hrxn = -43.4 kJ/mol. At the same temperature, use Hess's law to calculate Hrxn for the reaction: ClF (g) + F2 (g) ---> ClF3 (g).

The heat of **reaction** for ClF (g) + F2 (g) → ClF3 (g) is -174.0 kJ/mol at 25C, calculated using Hess's Law by subtracting the enthalpies of the intermediate reactions from the target reaction.

To calculate the heat of reaction for ClF (g) + F2 (g) → ClF3 (g), we can use Hess's Law, which states that the heat of reaction for a **chemical** reaction is independent of the pathway taken and depends only on the initial and final states.

First, we can write the target reaction as the sum of the intermediate reactions:

ClF (g) + F2 (g) + 2 O2 (g) → Cl2O (g) + F2O (g) + 2 F2O (g)

2 ClF3 (g) + 2 O2 (g) → Cl2O (g) + 3 F2O (g)

2 F2 (g) + O2 (g) → 2 F2O (g)

Next, we can manipulate the intermediate reactions to cancel out the Cl2O (g) and F2O (g) on both sides of the **equation**:

ClF (g) + F2 (g) + 2 O2 (g) → 2 ClF3 (g) + 2 O2 (g) + 2 F2 (g)

2 F2 (g) + O2 (g) → 2 F2O (g)

Finally, we can add the two manipulated reactions and simplify to obtain the target reaction:

ClF (g) + F2 (g) → ClF3 (g)

The heat of reaction for ClF (g) + F2 (g) → ClF3 (g) is therefore -174.0 kJ/mol, calculated by subtracting the enthalpies of the intermediate reactions from the target reaction.

For more questions like **Reaction** click the link below:

https://brainly.com/question/30086875

#SPJ11

An sp^2 hybridized central carbon atom with no lone pairs of electrons has what type of bonding? a. 0 π and 4 σ bonds b. 1 π and 3 σ bonds c. 1 π and 2 σ bonds d. 2 π and 2 σ bonds e. 3 π and 2 σ bonds

An sp² hybridized central carbon atom with no lone pairs of **electrons** has 1 π bond and 3 σ bonds. So, the correct option is b. 1 π and 3 σ bonds.

An sp^2 hybridized central carbon atom with no **lone pairs** of electrons has 3 sigma (σ) bonds and 1 pi (π) bond. In sp^2 hybridization, the carbon atom hybridizes one s orbital and two p orbitals to form three sp^2 hybrid orbitals. These hybrid orbitals have trigonal planar geometry, with 120 degrees between each other. The remaining **unhybridized** p orbital lies perpendicular to the plane of the three hybrid orbitals.

The three sp^2 hybrid orbitals overlap with the orbitals of three other atoms, forming three sigma (σ) bonds. These are strong, directional bonds that result from head-on overlap of **atomic orbitals**. The fourth bond is formed by the unhybridized p orbital, which can form a pi (π) bond with another atom's p orbital that is perpendicular to the sigma bonds. The pi bond results from sideways overlap of the p orbitals, and is weaker than the sigma bonds.

To know more about **electrons **visit:-

https://brainly.com/question/18367541

#SPJ11

Which alkyl halide is needed to produce leucine from Gabriel synthesis? 1-bromo-2-methylpropane 2-bromobutane 2-bromopropane bromomethane

The alkyl halide needed to produce leucine from Gabriel synthesis is 2-bromobutane. The correct answer is:** 2-bromobutane**

Gabriel synthesis involves the reaction of **phthalimide **with an alkyl halide to form the corresponding primary amine. The phthalimide is then hydrolyzed to release the amine. In this case, 2-bromobutane will react with phthalimide to form** N-(2-butyl)phthalimide**, which can be hydrolyzed to produce 2-amino butane, the precursor for leucine. The other options listed, 1-bromo-2-methylpropane, 2-bromopropane, and bromomethane, do not have a sufficient alkyl chain length to form the necessary precursor for leucine. Therefore, 2-bromobutane is the alkyl halide needed for the synthesis of leucine in the **Gabriel synthesis**. Hence, 2-bromobutane is the correct answer

To know more about ** 2-bromobutane, **here

brainly.com/question/31789656

#SPJ4

Based upon the model Imine NBO data (the NBO data shows that the hybridization of the lone pair is sp^4.03) and the 1H NMR spectrum of the imine product, explain how the N-atom lone pair in the immune influences the experimental 1H-NMR chemical shifts of the 1H atoms ortho and meta to the N-atom (relative to benzene)

The sp^4.03 **hybridization** of the N-atom lone pair in the imine results in increased electron density in the ortho and meta positions of the benzene ring, which in turn leads to deshielding of the protons in these positions in the 1H NMR spectrum.

In the presence of the N-atom with its sp^4.03 hybridization, the electron density in the ortho and meta positions of the benzene ring increases due to resonance effects. This **increased electron density** in the vicinity of these protons affects the local magnetic field, causing it to be deshielded, which results in a downfield shift in the 1H NMR spectrum. The extent of deshielding depends on the hybridization of the atom with the lone pair and its proximity to the proton in question, with more **hybridized atoms** having a greater effect on the NMR shift. Therefore, the sp^4.03 hybridization of the N-atom lone pair in the imine leads to increased electron density in the ortho and meta positions of the benzene ring, resulting in the observed deshielding of the protons in these positions in the 1H NMR spectrum.

To know more about **hybridization**,

https://brainly.com/question/14140731

#SPJ11

TRIAL 1 TRIAL 2

Volume of acid ,mL 20.5mL 20.0mL

Intial volume of NaOH in Buret 9.70mL 8.55mL

Final volume of NaOH in buret 30.30mL 28.25mL

volume of NaOH added , mL MB (NaOH) = 0.992M

what is the volume of NaOH added for trial 1 , and trial2?

1) Calculate the concentration of your acetic acid sample for each trial.

What is the average concentration? Use the equation MaVa = MbVb where Ma is

the molarity of the acid, and Va is the volume of the acid. Mb is the molarity of the

base (NaOH), and Vb is the volume of the base.

The **volume **of NaOH for trial 1 is 20.6 mL and the **concentration **of acetic acid is 0.98 M

The volume of the NaOH in trial 2 is 19.05 mL and the concentration of acetic acid is 0.95 M

What is neutralization?For trial 1;

Volume of the NaOH used = 30.3 - 9.70 = 20.6 mL

Volume of acid used = 20.5mL

Concentration of NaOH = 0.992M

Number of moles of NaOH = 0.992M * 20.6/1000 L

= 0.02 moles

Since the reaction is 1:1, Concentration of the acid = 0.02 moles * 1000/20.5

= 0.98 M

For trial 2

Volume of **NaOH **= 28.25 - 9.70 = 19.05 mL

Volume of acid used = 20.0mL

Concentration of NaOH = 0.992M

Number of **moles **of NaOH = 0.992M * 19.05 /1000 L

= 0.019 moles

Concentration of the acid = 0.019 moles * 1000/20 L

= 0.95 M

Learn more about **neutralization**:https://brainly.com/question/27891712

#SPJ1

how many grams of k o h are needed to neutralize 10.7 ml of 0.18 m h c l in stomach acid?

To determine the** grams of KOH **needed to neutralize 10.7 mL of 0.18 M HCl, we can use the** concept of stoichiometry and the balanced chemical equation between KOH and HCl.**

The balanced equation is as follows:

HCl + KOH -> KCl + H2O

From the balanced equation, we can see that the** molar ratio **between HCl and KOH is 1:1. This means that for every 1 mole of HCl, we need 1 mole of KOH to neutralize it.

First, we need to calculate the number of moles of HCl using the given volume and concentration:

Moles of HCl = Volume (L) x Concentration (mol/L)

Moles of HCl = 0.0107 L x 0.18 mol/L

Moles of HCl = 0.001926 mol

Since the** molar ratio** between HCl and KOH is 1:1, we need the** same number of moles** of KOH to neutralize the HCl.

Next, we calculate the grams of KOH needed using the** molar mass** of KOH:

Grams of KOH = Moles of KOH x Molar Mass of KOH

The molar mass of KOH is calculated as follows:

Molar Mass of KOH = Atomic Mass of K + Atomic Mass of O + Atomic Mass of H

Molar Mass of KOH = (39.10 g/mol) + (16.00 g/mol) + (1.01 g/mol)

Molar Mass of KOH = 56.11 g/mol

Now we can calculate the grams of KOH needed:

Grams of KOH = 0.001926 mol x 56.11 g/mol

Grams of KOH = 0.1081 g

Therefore,** approximately 0.1081 grams of KOH are needed to neutralize 10.7 mL of 0.18 M HCl in stomach acid.**

Remember to always double-check your calculations and use the correct **molar masses and units for accurate results.**

Learn more about** stoichiometry and neutralization reactions to further enhance your understanding of this topic.**

https://brainly.com/question/30218216?referrer=searchResults

**#SPJ11**

PLEASE HELPLPPPP! All life that we know of is based on carbon. Carbon's ability to form many chemical bonds is an important characteristic that allows it to form the basis of life. Identify two other elements that can probably also form a large number of bonds and that probably have similar properties to carbon. Explain your answer.

The two elements that can probably also form a large number of bonds and that probably have similar properties are **starch** and cellulose.

One crucial quality that makes it possible for **carbon** to serve as the building block of life is its capacity to establish many chemical connections. Despite having the same chemical, **cellulose** and starch have distinct structures. Both of them are polysaccharides. Glucose is a polysaccharide's fundamental building block. There are two types of glucose, which is composed of carbon, hydrogen, and oxygen.

Beta-glucose with an alcohol group connected to carbon one is high whereas alpha-glucose with the same group is down. Starch contains alpha-glucose, while cellulose contains **beta-glucose**. In contrast to cellulose, which is connected like a stack of paper, starches are joined in a straight chain. The human body can digest **starch** when consumed, but not cellulose since it lacks the enzyme necessary to do so.

Read more about **starch **on:

https://brainly.com/question/22176024

#SPJ1

2. calculate the molarity of a solution that was made by adding 23.5 g of kbr to enough water to make 0.5 l of solution

The molarity of the solution made by adding 23.5 g of KBr to enough water to make 0.5 L of solution is 0.394 M.

To calculate the** molarity** of a solution, we need to know the number of moles of the solute (KBr) in the given amount of solution.

To calculate the number of **moles** of KBr in 23.5 g of KBr:

Molar mass of KBr = 119 g/mol

Number of moles of KBr = 23.5 g / 119 g/mol = 0.197 moles

**Volume **of the solution in liters:

Volume of solution = 0.5 L

we can calculate the molarity of the solution using the formula:

Molarity = moles of solute / volume of solution (in L)

Molarity = 0.197 moles / 0.5 L = 0.394 M

Therefore, the molarity of the solution made by adding 23.5 g of KBr to enough water to make 0.5 L of solution is 0.394 M.

For more questions on **molarity of solution** : https://brainly.com/question/30727546

#SPJ11

how many grams of co2 gas are in a storage tank with a volume of 1.000×105 l at stp?

There are approximately 196,430.6 grams of **CO2 gas **in the **storage tank **with a volume of 1.000 x 10^5 L at STP.

To determine the grams of CO2 gas in a storage tank with a volume of 1.000 x 10^5 L at STP, you will need to use the i**deal gas law** and **molar mass **of CO2.

First, we need to find the moles of CO2 present in the tank. At standard temperature and pressure (STP), 1 mole of any gas occupies 22.4 L. To find the moles of CO2, you can use the formula:

moles = volume / molar volume at STP.

In this case, moles = (1.000 x 10^5 L) / 22.4 L/mol = 4464.29 mol of CO2.

Next, we need to find the grams of CO2 using the molar mass of CO2. The molar mass of CO2 is approximately 44.01 g/mol (12.01 g/mol for carbon and 2 x 16.00 g/mol for oxygen). To find the grams of CO2, you can use the formula:

grams = moles x molar mass.

In this case, grams = 4464.29 mol x 44.01 g/mol = 196,430.6 g of CO2.

So, there are approximately 196,430.6 grams of **CO2 gas **in the **storage tank **with a volume of 1.000 x 10^5 L at STP.

Know more about **CO2 gas **here:

https://brainly.com/question/18529963

#SPJ11

What occurs when aqueous silver nitrate, AgNO3, reacts with aqueous potassium sulfate, K. SO,? Select one: O No precipitate forms and no reaction occurs. 0 AgNO3 forms as a precipitate. O Ag SO, forms as a precipitate. O KNO, forms as a precipitate. O K SO, forms as a precipitate.

When aqueous silver nitrate, AgNO³, reacts with aqueous potassium sulfate, d. Ag²SO⁴, a** precipitation reaction** occurs.

The products of this reaction are** solid silver sulfate,** Ag²SO⁴, and aqueous potassium nitrate, KNO³. This reaction can be represented by the following balanced chemical equation:

AgNO³(aq) + K²SO⁴(aq) → Ag²SO⁴(s) + 2KNO³(aq)

In this reaction, the** silver ions** (Ag+) from the silver nitrate react with the sulfate ions (SO⁴-) from the potassium sulfate to form solid silver sulfate (Ag²SO⁴), which appears as a white precipitate. The potassium ions (K+) from the potassium sulfate react with the nitrate ions (NO³-) from the silver nitrate to form aqueous potassium nitrate (KNO³). Therefore, the correct answer is "d. Ag²SO⁴ forms as a precipitate." The formation of a precipitate in this reaction indicates that a chemical reaction has taken place and a new substance has been formed.

To learn more about **precipitation reaction** here:

https://brainly.com/question/29762381

#SPJ11

Of the following, which are not polyprotic acids? (select all that apply) Select all that apply: НІ HNO3 НСІ H2SO4

Of the following, which are not **polyprotic** acids? (select all that apply)

- HNO3

- НСІ

A polyprotic acid is an acid that has more than one acidic proton, which can be donated in a stepwise manner. Each proton is donated with a different acid dissociation constant (Ka) value.

Out of the given options, HNO3 and НСІ are not polyprotic acids. They both have only one **acidic** proton and can donate it in a single step.

H2SO4, on the other hand, is a polyprotic acid as it has two acidic protons, which are donated in two steps. The first dissociation of H2SO4 results in the formation of HSO4- ion, which is also an acid and can donate its proton to form SO42- ion.

НІ is also a polyprotic acid as it can donate its **proton** twice, resulting in the formation of I- and H2I+ ions.

In summary, the not polyprotic acids from the given options are HNO3 and НСІ.

These are monoprotic acids, meaning they can only donate one proton (H+) per **molecule**. On the other hand, H2SO4 (Sulfuric acid) is a polyprotic acid, as it can donate two protons (H+) per molecule.

To know more about **polyprotic **visit :-

https://brainly.com/question/29993754

#SPJ11

Place the following in order of bond length. SO42- , so32-, soz OSO3 < 3042-

The order of **bond length **from shortest to longest is as follows: SO42-, SO32-, SOZ, OSO3, 3042-.

This order can be determined by analyzing the number of oxygen atoms bonded to the sulfur atom in each molecule. The more oxygen atoms bonded to the sulfur atom, the shorter the bond length.

SO42- has the shortest bond length because it has four oxygen atoms bonded to the sulfur atom, resulting in strong **electrostatic attraction **and a shorter bond length. SO32- has three oxygen atoms bonded to the sulfur atom, making its bond length longer than SO42-. SOZ has two oxygen atoms bonded to the sulfur atom, making its bond length longer than SO32-.

OSO3 has a bond length longer than SOZ because it contains two sulfur atoms with a double bond between them, resulting in a longer bond length. Lastly, 3042- has the longest bond length because it has four oxygen atoms bonded to two sulfur atoms, resulting in **weaker electrostatic attraction **and a longer bond length. In conclusion, the order of bond length from shortest to longest is SO42-, SO32-, SOZ, OSO3, 3042-.

Know more about **Bond Length **here:

https://brainly.com/question/31625763

#SPJ11

34/9 as a mixed number
Help I forgot how to add the remainder I don't want the answer I just need help :(.
What is the possible factors of the given number or expression of 8?
Why does candy want to join in with george and lennies plans?
i need to have a paper written that is about using time wisely. please help i need this before this class ends
how do i solve this? they dont make it clear on here
. Johnathan road his bicycle up a hill at a velocity of 17.15 m/s. Johnathan and his bicycle hada combined mass of 88 kg. What was the height of the hill?
A cube is sliced with a plane. A slice through all faces is a
Why is acceleration 0 at max speed?
How much heat is transferred per mole of NH3(g) formed in the reaction shown below?N2(g) + 3 H2(g) ? 2 NH3(g) ?H = 92.2 kJ
bacteria and viruses can only survive on a dry surface for about two hours true or false
A. The slope of m is 25. B. The slope of q is 52. C. The slope of n is 25. D. The slope of p is 52. Which statements are true?
What US action in 1941 angered the Japanese?
What word from algebra refers to the steepness of a line or segment?
What are the two 2 coordinate system in AutoCAD?
thirty five to ten added to five eithghs of a number, Write an equation for this sitation and then find the number
What is the rhyme scheme of a ode poem?
How does Hrothgar compare to Beowulf?
How do you dilate from 2cm to 10cm?
1. Which of the following from lines 17-22 includes an example of onomatopoeia?A. "Double-flashing to the metal hoop" B. "Tangled up in a falling,"C. "We were metaphysical when girls"D. "& feet...sprung rhythm."